02177638731 – 02177638732
Sludge scraper bridge is one of the main components in sedimentation ponds that prevent the accumulation of sludge and sediments in the bottom of the pond. Sludge removal bridges are designed and produced in different models according to the type of ponds and each of them has unique features. Seven Industrial Group is a manufacturer of sludge bridge and other wastewater treatment equipment, which has set various standards for the production of these products. In this article, we will provide a comprehensive guide including important standards in the design, production and construction of Sludge Scraper Bridge, price and working method of this equipment.
The presence of solids and suspended solids in industrial and sanitary wastewaters is one of the main cases that are tried to be eliminated by various methods. Creating sedimentation ponds and allowing suspended and heavier materials than sewage to settle to the bottom is one of the effective ways in this field. Sedimentation is performed with various equipments such as clarifier and wastewater without suspended solids is used in the next steps. After settling of these materials, it is necessary to clean the bottom of the ponds in different ways and drain the sludge. Sludge scraper Bridge is one of the best solutions in this situation, which collects and discharges sludge by moving it horizontally or rotating. Sludge scraper Bridge is installed on sedimentation ponds and it is possible to place human operators and move on the bridge.
Sludge Scraper Bridge is designed and manufactured according to the type of ponds and each of them has several differences in terms of general shape and how to move and collect sediment and sludge. Depending on the type of sedimentation ponds, sludge removal bridges can be divided into the following groups:
Rotating Sludge Scraper Bridge is located on the cylindrical ponds and is designed and produced with two types of half bridge and full bridge. After the sediment suspended in the sewage at the bottom of the ponds, the blade connected to the bridge is placed at the bottom of the pond and transmits the sludge to the center by circular motion and creating a centrifugal force. Finally, the sludge is collected and discharged in the center of the pond.
In addition to cylindrical ponds, rectangular sedimentation ponds are also used in some refineries and industrial environments. Sludge Scraper Bridge installed on this type of pond has a blade the width of the pond and moves horizontally and directly. The movement of the blade at the bottom of the pond causes the layers of sludge to separate from the bottom and be transferred to the end of the pond and finally emptied.
In designing Sludge Scraper Bridge, in addition to carefully selecting its important parts and components, it is necessary to pay attention to their material and the speed of rotation and movement of the blades. In the general structure of Sludge Scraper Bridge, there are various components such as round floor bearings, grating, blade, sludge blade slipper and electrical panel, bearing and body. The most important point is the material used for each of these parts, which has a direct impact on the efficiency and longevity of the bridge. Due to the organic matter and chemicals in the wastewater, it is necessary for the blades and the parts that are placed in the pond to be resistant to corrosion and rot. Stainless steel is a good option for designing these parts and the body of the bridge can also be designed from fiberglass.
In addition to the above, the rotation speed and movement of the sludge scraper blade are other factors that should be considered during the design of these bridges. In the products produced by Seven Industrial Group, the rotation speed of the bridge is adjustable and according to the capacity of the pond and the amount of sludge and sediment in them, a suitable speed can be selected. In most cases, the rotation speed is in the range of 0.5 to 3 revolutions per minute. It should also be noted that in the design of rotating bridges, the blade has a slope of about 8% towards the center so that the transfer of sediment can be done easily. In designing a Sludge Scraper Bridge, it is necessary to pay attention to the width of the bridge and placing a suitable space for human movement on it.
Seven Industrial Group, which is the oldest manufacturer of water and wastewater treatment equipment in Iran, designs and manufactures Sludge Scraper Bridge under the supervision of professional engineers in this field. The products produced in this collection are designed according to the conditions of their installation environment, and for this purpose, the design and development team considers all the desired features and provides the best design in the end. Due to the high variety of these products and the standards used in the construction of Sludge Scraper Bridge, we suggest that you contact the experts of Seven Industrial Group for information on the features of each.
The price of Sludge Scraper Bridge is determined according to the material of the body and other parts in it, the size of the bridge and the features used in it. To inquire about the price of Sludge Scraper Bridge, you can use the communication channels mentioned at the bottom of the page. The experts of Seven Industrial Group are ready to provide the necessary advice before buying this product.
Due to the great importance of collecting sludge and sediments in the bottom of sedimentation ponds, Sludge Scraper Bridge is used in various environments, including the following options:
· Sludge Scraper Bridge for municipal water treatment plants
· Use of Sludge Scraper Bridge in industrial treatment plants
· Use of Sludge Scraper Bridge in the pre-treatment stages of industrial and sanitary wastewater
Asayesh Afza Imen Company started its activity in the 70s with the aim of providing engineering consulting services in the construction and operation of water and wastewater treatment systems. This group operates by taking possession of the world’s technical knowledge and relying on new engineering technologies in the field of design, construction, installation and commissioning of water (industrial, domestic, swimming pool) and sewage systems.
Design: Mahyan
Leave a Reply